The Stockings Were Hung...

In Arizona they don't have dumps where you can take all your large garbage to, they have this super awesome system where once a month you leave out anything on the street you want picked up by a truck. This works out great for two reasons. 1-You don't have to make trips to the dump- the dump comes to you. And 2- You get to look through other people's garbage to see if you want any of it! :) Last week as I was dropping my daughter off at preschool I drove by a house with a huge pile of wood to be trashed and immediately turned around and threw it in the back of my car. And don't worry, I went back twice more to get the rest. :) The wood is absolutely perfect and SO my style. Anyway...

We don't have a fireplace this year in the house we're renting, so I decided to make my own sign to hang our stockings...

 

Sorry about the background!

I LOVE how it turned out! Now I just need to add a couple holes and some ribbon or twine to hang it on my wall. 

HOW TO:

Items needed: 

wood

Citra Solv

Paint brush

Laser printer

1. Cut wood and assemble however you like.

A SUPER HUGE thanks to my awesome friends Jake & Jourdan for helping me with it! They have all the tools anyone could ever want, so I took it over to be cut and Jake totally cut and glued the entire thing for me!! So so nice of him!!

2. I found a way on Pinterest to transfer printer ink onto wood and it worked awesome! (click HERE for the full tutorial) This method I used only works with a laser printer, so make sure that's what you have before starting. I used Word to flip my letters because you have to flip the paper over to transfer the ink...make sense? If you're using Word also, go to create word art, choose lettering and use the formatting palette (the side bar) to flip your image. Press the rotate button and flip horizontal.

3. Once you have your image printed, line it up on the board and make sure it's exactly how you want it, then turn your image over, ink side down.

4.  Citra Solv is a natural degreaser that can be found in natural food stores, I found mine at Whole Foods. Pour a small amount of Citra Solv in a bowl and using a paint brush, paint on just enough Citra Solv to wet the letters just slightly. Turn your paint brush around and scratch each letter with the handle of the brush. Don't scratch too hard, just enough to help the ink rub off onto the wood. Make sure to work in sections, I painted the Citra Solv on about 4 letters at a time. And don't use too much or the ink will bleed and not stick nicely. Hold the paper with your fingers firmly in place so you don't move the letters or ink around at all.

 5. When you're finished, remove the paper and let it dry.

 6. These knobs are from Hobby Lobby. I LOVE them, but they were a little too white for the wood...

 So I rubbed a little stain over them to darken them up a bit...

Then I measured, drilled holes and put the four knobs in the wood. 

 That's it. Done. So easy and SO cheap. I think the knobs were $10 from 50% off, the wood was free, and the bottle of Citra Solve was $6.99 (which I only used about 2 Tablespoons of. 

 Click HERE for the tutorial of the stockings I made last year.

So sorry if this post is a little scatter-brained!! It's been a long week :)